- + Spacers
- Size: 1/16" spacers
- Bags: 81-P116B
- Quantity: 300
-
Sale!CB SPACERS 1/16" + Spacer/Bag ProBiltSERIES Tile Spacers - 1/16" - 300 per Bag.
-
Sale!CB SPACERS 1/2" + Spacer/Bag ProBiltSERIES Tile Spacers - 1/2" - 35 per Bag.
- + Spacers
- Size: 1/2" spacers
- Bags: 81-P12B
- Quantity: 35
-
Sale!CB SPACERS 1/4" + Spacer/Bag ProBiltSERIES Tile Spacers - 1/4" - 100 per Bag.
- + Spacers
- Size: 1/4" spacers
- Bags: 81-P14B
- Quantity: 100
-
Sale!CB SPACERS 1/8" + Spacer/Bag ProBiltSERIES Tile Spacers - 1/8" - 200 per Bag.
- + Spacers
- Size: 1/8" spacers
- Bags: 81-P18B
- Quantity: 200
-
Sale!CB SPACERS 3/16" + Spacer/Bag ProBiltSERIES Tile Spacers - 3/16" - 150 per Bag.
- + Spacers
- Size: 3/16" spacers
- Bags: 81-P316B
- Quantity: 150
-
Sale!CB HOLE SAWS Carbide Hole Saw - 1-3/8" SuperiorBilt Carbide Hole Saw provides smooth, clean, and chip-free drilling.
- Cutting Material: Carbide Grit
- Best for Cutting: Ceramic Tile and Underlayments
- Item No: 82-356
- 1-3/8" Diameter Hole Saw
-
Sale!CB CHEATER BEATER BOX MIXING PADDLE 72A-85 Four rounded mixing bars allow easy mixing for the entire bucket.
- For mixing thin-set or medium-bed mortar
- Hexagonal, non-slip shaft
- Injects little or no air on a dry or wet mix
- Use with 1/2" drill motor
-
CB GROUT SPONGE 7-1/2X5-X2-1/2 48-2XL-D SuperiorBilt Hydrophilic Sponge. Extra large sponge picks up more residue and releases it easier. Ideal for grouting and cleaning. 7-1/2" x 5-1/4" x 2-1/2" - 250 per Bale
- For grouting and cleaning
- Features a smooth, less porous surface that will not load with sand, cement or grout
- Exceptional absorption, easy to rinse, long-lasting
- Item No: 48-2XL-D
- 7-1/2" x 5-1/4" x 2-1/2" Sponge
-
Out of stockCB SQ NOTCH TROWEL 1/4X3/8X1/4 PART#85-51G Platinum Knee Pads. Unlike ordinary knee pads, Platinum Knee Pads are designed for comfort, offering a custom fit with designated left and right to match your knee caps and a shin support. Extra wide straps will not bind behind your legs.
- Ultimate in comfort and durability
- No bind straps and dense foam pads
- Quick snap release
- Shin support at lower wedge, relieves pressure at knees and toes
- Designated left and right to match knee caps
- Item No: P1KP1
- Platinum Knee Pads
-
Sale!
Mapeguard UM is a premium-performance, lightweight, waterproofing and vapor-pressure-equalizing underlayment membrane that provides crack suppression for use under ceramic tile and stone installations, for both residential and commercial applications. It is designed to perform over challenging substrates, such as young concrete and single-layer 3/4" (19 mm) plywood subfloors with joist spacing of up to 19.2" (49 cm) on center or up to 24" (61 cm) on center with double-layer plywood subfloors. The unique engineered tri-layered design of Mapeguard UM absorbs lateral stress from the substrate without transferring this force to the tile or stone, which maintains exceptional bonds. - Prevents transmission of in-plane substrate cracks up to 1/8" (3 mm)
- Recommended for use with polymer-modified mortars
- FastTrack Ready™: Approved for use over young (green) concrete and mortar beds
- Time-saving: Embed membrane then install tile immediately
- Engineered cavity design allows easy single-pass filling of surface core with less mortar
- Uncoupling, waterproofing and water vapor membrane up to 25 lbs. (11.3 kg) MVER and 100% relative humidity (RH)
- Compression resistance to support rolling loads
- Approved for radiant-heating applications
- Light green, translucent color shows mortar coverage under membrane
- Reduced “roll memory” and unique tri-layer construction keep membrane flat
-
Sale!
Mapeguard UM is a premium-performance, lightweight, waterproofing and vapor-pressure-equalizing underlayment membrane that provides crack suppression for use under ceramic tile and stone installations, for both residential and commercial applications. It is designed to perform over challenging substrates, such as young concrete and single-layer 3/4" (19 mm) plywood subfloors with joist spacing of up to 19.2" (49 cm) on center or up to 24" (61 cm) on center with double-layer plywood subfloors. The unique engineered tri-layered design of Mapeguard UM absorbs lateral stress from the substrate without transferring this force to the tile or stone, which maintains exceptional bonds. - Prevents transmission of in-plane substrate cracks up to 1/8" (3 mm)
- Recommended for use with polymer-modified mortars
- FastTrack Ready™: Approved for use over young (green) concrete and mortar beds
- Time-saving: Embed membrane then install tile immediately
- Engineered cavity design allows easy single-pass filling of surface core with less mortar
- Uncoupling, waterproofing and water vapor membrane up to 25 lbs. (11.3 kg) MVER and 100% relative humidity (RH)
- Compression resistance to support rolling loads
- Approved for radiant-heating applications
- Light green, translucent color shows mortar coverage under membrane
- Reduced “roll memory” and unique tri-layer construction keep membrane flat